ESS150-24 - ETA-USA ESS150-24 Power Supply

ESS150-24 - ETA-USA ESS150-24 Power Supply - 150W, AC/DC Switching PS Simple...

ETA-USA ESS150-24 Power Supply - 150W, AC/DC Switching PS Simple Type: Power Supply

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Can meet medical and appliance standards
Low leakage < 500µA
Operating temp shows full load at 50°C (122° F), can operate at temperatures up to 71°C
Over-current protection
Over-voltage protection
Remote Sensing (sense line) available
Smaller than competitors by 15-20%

General

Cooling: Convection
Dimension (WxLXH): 37.5mm x 164.5mm x 81.5mm
Driving Indicator: Power Source on LED indication; Green
Humidity: Operating:20~90% RH; Storage:10~95% RH [non-condensing]
Isolation Resistance: Primary-Secondary-Frame Ground 100MO(minimum) by DC500V insulation tester
Leakage current: 500µA
Line Conducted Noise [EMI]: Built to meet FCC-B, VCCI-B, CISPR22-B, EN55022-B
Line Harmonic Distortion/Current: IEC61000-3-2 Compliant
MTBF: >150,000 hours
Over current Protection: Operate at 105% min of rated current, automatic return
Over voltage Protection: Input reentry at shutdown
Parallel Operation: Not Available (N+1 Operation is Applicable by Diode-OR)
Remote Control: Applicable by Option(External signal input is required)
Remote Sense: Available
Safety: UL60950-1 1st ed., CAN/CSA C22.2 No.60950-1-03-Approved; UL508 17th ed., CAN/CSA C22.2 No.107.1-01-Approved; EN60950-1:2001+A11:2004-Approved; CE Marking:EN60950-1:2001+A11:2004(LVD)-Declared
Series Operation: Available
Shock: 196 m/s2 on x,y,z axis
Temperature: Operating:-10 to +71°C; Storage:-30 to +85°C
Vibration: 5~10Hz:10mm double amplitude,10-55Hz:19.6m/s2,30 minute cycle each along X,Y,Z axes(non-operating)
Weight (typical): 600 g
Withstanding Voltage: Primary-Secondary:AC3,000V for 1minute; Primary-Frame Ground:AC2,500V for 1minute; Secondary-Frame Ground:AC1,000V for 1minute; *Sensory Current: Secondary Frame Ground-(20[mA])/Others (10[mA])